RedSeaRate

Shipping to Jeddah: SABER in 5 steps

RedSeaRate · Updated

Five SABER steps for Jeddah: check the HS code, open the importer account, then the product certificate and the shipment certificate.

A process note, not clearance advice

This is a general process note for the SABER steps on a shipment to Jeddah. It is not legal advice, and it is not customs advice. The certificate a product needs depends on its HS code and on the rules in force when the file is made. Check the HS code, and treat the clearance partner's confirmation as the result that counts. Nothing on this page promises an outcome for a named product.

SABER is SASO's platform. The five steps below are the same sequence as the short note already written for this subject: find out whether the HS code is regulated, have the Saudi importer open the record, obtain the product certificate where one is required, obtain the shipment certificate for this cargo, and leave a certificate that Jeddah customs can read electronically. Read them in that order. A later step does not repair a code or a product record that was wrong at the start.

Step 1: check the HS code

Start with the HS code. On SABER, that code is how you tell whether the product is regulated. A regulated product needs a certificate. A product that is not regulated is not asked for that certificate: only the basic information is recorded.

The Saudi Arabia page describes the non-regulated path in its own words: non-regulated products use an importer self-declaration. This note does not merge that sentence with the line above into a new rule. Both are already written. The code decides which description you are in. A code copied from a similar product, or guessed from a trade name, sends the file through the wrong door. The person who knows the goods should confirm the code before anyone opens a SABER record.

Do this before the booking is treated as ready. The product certificate, where the product is regulated, is issued against the product and the model that the code describes. A code that changes later is not a clerical fix. It changes the product the certificates were built for, and the shipment certificate that hangs on those certificates stalls. Confirm the code once, write it the same way on the invoice, and leave it.

Step 2: the importer opens SABER

The Saudi-registered importer opens the SABER account, or a representative that importer has authorized does it. The record they enter is the product and the importer. A shipper in China does not take the importer's place on the platform. If the buyer has not opened the account, and has not named the representative who will, the certificates in the next steps have nowhere to sit.

Ask whether that account exists while the cargo is still at the factory. The product information and the importer information in the account have to be the information the commercial invoice and the bill of lading will carry. The shipment certificate has to match those two papers. An account opened under a shortened trading name, or under a product description the invoice will not use, has to be corrected before the shipment certificate is requested, not after Jeddah has already tried to read it.

The importer is also the party named when a marking rule applies. Since 1 October 2026, the Saudi Arabia page says products under ten technical regulations must show the importer's name and commercial registration number. This note does not list those ten regulations. They are not listed on that page either. Whether this product is one of them is a question for the HS code and for the clearance partner, not a conclusion this page can make.

Step 3: the product certificate

The product certificate of conformity, the PCoC, comes next for a regulated product. It is one certificate per product and per model. A conformity body that SASO recognizes issues it, against the Saudi standard that applies. Where that standard requires testing, the file includes the test evidence.

A PCoC is valid for up to 1 year. Testing can add 2–4 weeks, so the work has to start several weeks before the shipment certificate is needed. A product certificate that expires before you apply for the shipment certificate is not a valid product certificate. Renew it before the expiry. Waiting until a file has already been refused is the late version of the same task.

One model is one certificate. A second model is a second certificate, even when the commercial name looks the same. Keep the model, the applicable standard and the test evidence on the version of the product that will actually be loaded. If the declared specification changes while the certificate is in progress, the shipment certificate that has to hang on this PCoC stalls. Finish the specification before the application, and do not revise it in the middle.

Step 4: the shipment certificate

The shipment certificate of conformity, the SCoC, is one certificate for this shipment. It hangs on a PCoC that is still valid. The application uses the invoice and the bill of lading data. No valid PCoC means there is no SCoC. No SCoC means Jeddah cannot clear the cargo.

The Saudi Arabia page states the same certificate for every shipment, regulated or not. It states the fee as SAR 350 before VAT, the validity as 90 days, and the match: the certificate must agree with the bill of lading and the commercial invoice. Those 90 days are the life of the shipment certificate. They are not the period of up to 1 year on the PCoC. A shipment certificate built on an old consignee, an old model or an old value will not match the papers, and a certificate that does not match is not the certificate customs will accept.

Read the draft invoice and the draft bill of lading against the SABER application before you treat the shipment certificate as finished. The data on the application are the data customs will compare. A correction after the certificate is issued is a new pass through the same match, not a note in the margin. For a product that is not regulated, SABER still only records the basic information at the product step, and the Saudi Arabia page still calls that path an importer self-declaration. The shipment step does not disappear. Every shipment still needs the shipment certificate.

Step 5: Jeddah customs reads it

At Jeddah, customs checks the SCoC electronically. SABER and the customs platform are linked. The certificate is the record on that link, for this shipment. There is nothing useful to add at the counter if the shipment certificate was never issued, or if the product certificate under it has already expired.

Renew the PCoC before it expires. A product certificate that runs out while the shipment certificate still depends on it leaves the shipment without a valid PCoC, and without a valid PCoC there is no SCoC. Changing the declared specification at this stage stalls the SCoC as well. The specification customs reads has to be the specification the certificates were issued for.

The Saudi Arabia page adds a separate clock for the customs declaration. It is filed on FASAH at least 48 hours before the vessel arrives. That 48 hours is the declaration before arrival. It is not the 2–4 weeks that testing can add to a PCoC, and it does not stand in for the shipment certificate. Both have to be done. The declaration does not create the SCoC, and the SCoC does not replace the declaration.

Before the cargo is called ready

A workable order is the five steps, started while the cargo is still at the factory. Confirm the HS code and whether SABER treats the product as regulated. Have the Saudi-registered importer, or the authorized representative, open the account and enter the product and the importer. If the product is regulated, start the PCoC several weeks ahead, allow 2–4 weeks where testing is required, and keep a certificate whose validity is at most 1 year. Apply for the SCoC against a PCoC that is still valid, using the invoice and the bill of lading, and check the match. The Saudi Arabia page is where the shipment-certificate fee of SAR 350 before VAT and the 90-day validity are stated. Leave the declared specification unchanged once that chain is built. Renew the PCoC before it expires, so the electronic check at Jeddah has a shipment certificate to read.

If the product is not regulated, the product step is the basic information only, which the Saudi Arabia page describes as an importer self-declaration, and the shipment still needs its SCoC. Check the HS code again with the clearance partner before the file is treated as ready. This page does not confirm a certificate for any named product. The country page is the place for the rest of the Saudi file, including the FASAH declaration at least 48 hours before arrival.

Questions these steps answer

Does every shipment to Jeddah need a SABER shipment certificate?

Yes. Every shipment needs a SABER shipment certificate, whether or not the product is regulated. Without that certificate, Jeddah cannot clear the cargo.

How long do the SABER certificates last?

A product certificate (PCoC) is valid for up to 1 year. The shipment certificate (SCoC) stated on the Saudi Arabia page is valid for 90 days, costs SAR 350 before VAT, and must match the bill of lading and the commercial invoice.

What if the product is not regulated?

On SABER, a product that is not regulated only needs its basic information recorded. The Saudi Arabia page describes non-regulated products as an importer self-declaration. The shipment still needs a shipment certificate.

What stops the shipment certificate?

There is no shipment certificate without a valid product certificate. Jeddah customs checks the shipment certificate electronically, because SABER is linked to the customs platform. Changing the declared specification stalls the shipment certificate, and the product certificate has to be renewed before it expires.